Tinplate Sheet
Tinplate Sheet
Double Reduced Cold-Rolled Tinplate
Double reduced cold-rolled tinplate is given a partial cold reduction to reach an intermediate gauge, then annealed and given another cold reduction to the final gauge prior to coating with tin. The resulting product is stiffer, harder, and stronger than single reduced cold-rolled tinplate.
Big fire special steel, high strength steel plate, steel industry supply and demand, steel suppliers
Double Reduced Cold-Rolled Tinplate Description
Tinplate is a steel product with a stampable thin steel plate as the base, tin plating on the surface, and multiple protective films. It has the characteristics of corrosion resistance, non-toxic, odorless, glossy surface, light weight, high strength, easy to print, easy to weld and process, as well as a strong adaptability to ambient temperature. Double cold-reduced tinplate is usually supplied with a stone surface finish and a flow-brightened tin coating. When ordering double cold-reduced tinplate, the purpose of manufacture for which the material is intended should be stated. Double reduced cold-rolled tinplate is relatively less ductile than single reduced cold-rolled tinplate and has very distinct directional properties, so for some uses, for example for built-up can bodies, the direction of rolling should be stated.
Product Parameters
Product Name | Double Reduced Cold-Rolled Tinplate |
Thickness | 0.18mm-0.50mm |
Width | 260mm-980mm |
Length | Support Customization |
Tin Coating | General: 2.8g or 5.6g, can be produced according to your needs |
Substrate Type | MR / SPCC / L / D |
Reference Standard | GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203 |
Surface State of Tinplate
Surface State | Features |
Light Surface | Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern |
Stonetextured Surface | Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction |
Silvercolor Surface | Electroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull |
Mattless Surface | The surface of the substrate is rough and dull, and the tin plating layer is not soft melting |
Substrate Type
Substrate Type | Introduction |
MR | The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance |
L | Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate |
D | Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial |
SPCC | Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes. |
Coating Weight
Classification | Representation of Tin Coating Weight | Tin Plating Nominal Weight (g/m2) | Minimum Average Tin Plating Weight (g/m2) |
Equal Tin Plating (E) | 1.1/1.1 | 1.1/1.1 | 1.8 |
2.2/2.2 | 2.2/2.2 | 4.0 | |
2.8/2.8 | 2.8/2.8 | 5.0 | |
5.6/5.6 | 5.6/5.6 | 10.5 | |
Differentiated Tin Plating (D/A) | 2.2/1.1 | 2.2/1.1 | 2.0/0.9 |
2.8/1.1 | 2.8/1.1 | 2.25/0.9 | |
5.6/1.1 | 5.6/1.1 | 5.05/0.9 | |
2.8/2.2 | 2.8/2.2 | 2.25/2.0 | |
5.6/2.2 | 5.6/2.2 | 5.05/2.0 | |
5.6/2.8 | 5.6/2.8 | 5.05/2.25 |
Chemical Composition
No. | C | Si | Mn | S | P | Cu | Ni | Cr | Mo |
D | 0.12 | 0.03 | 0.6 | 0.05 | 0.02 | 0.2 | 0.15 | 0.1 | 0.05 |
L | 0.13 | 0.03 | 0.6 | 0.05 | 0.15 | 0.03 | 0.04 | 0.06 | 0.05 |
MR | 0.13 | 0.03 | 0.6 | 0.05 | 0.2 | 0.2 | 0.2 | 0.1 | 0.05 |
Mechanical Properties & Applications
Standard Name | Nominal Hardness HR30TS | Strong Yield MPA | Scope of Application |
T-1 | 49 | 230 /-50 | Drawing requirements, drawn ironing cans, nozzles, nozzles, closures |
T-2 | 53 | 245 /-50 | Ring and plug, dome, closure, shallow pull and special tank parts |
T-2.5 | 55 | 260 /-50 | Battery cell, small can cover and body |
T-3 | 57 | 275 /-50 | Cans and cans, large diameter caps, crown caps |
T-3.5 | 59 | 290 /-50 | Can body, closure and crown lid |
T-4 | 61 | 340 /-50 | Can body, closure and crown lid |
T-5 | 65 | 480 /-50 | Cans and cans |
Ordering Notes
The ordering elements for tin plating generally include: standard grade (including steel grade code, annealing method and other information such as MR T-3 CA), size (the default order is thickness * width * length, tin plating amount ((different thickness plating) Tin needs to add A/D as the marking line mark, if not, no marking line will be marked), surface, order quantity, etc.
When ordering tin plating, please confirm with our sales staff the end use, such as canbody, ends, twist off caps, crown cork, EOE, etc., as well as the contents, special contents such as milk powder, high protein food, mushrooms, fruits, etc.;
What is your working time?
In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry during the next working day.
How to pack the products?
The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Can you send samples?
Of course, we can send samples to all parts of the world, our samples are free, but customers need to bear the courier costs.
What product information do I need to provide?
You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
What are the shipping ports?
Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other ports according to your needs.
About product prices?
Prices vary from period to period due to cyclical changes in the price of raw materials.
What are the certifications for your products?
We have ISO 9001, SGS, EWC and other certifications.
How long does your delivery time take?
In general, our delivery time is within 30-45 days, and may be delayed if the demand is extremely large or special circumstances occur.
